Ariseo Water Tech
Katraj, Pune, Maharashtra
GST No. 27AHEPC0745K1ZI
08047635652 75% Response Rate
Send E-mail
- Home
- »
- Our Products
- »
- Water Softener Plant
A hard water softener is an appliance that uses sodium chloride, also known as salt, to treat hard water. Hard water contains an excess of minerals such as calcium, magnesium, manganese, and iron that can be an expensive nuisance for a home. These minerals are taken up in the underground water supply and, as the water is heated in the home, they crystallize and stick to household surfaces. Sodium chloride, the effective component of water softener, works to replace these unwanted minerals.
A water softener is a fairly simple appliance that is stocked with salt. In water softening process the water supply passes through the water softener over resin beds, rows of resin beads perform an ion-exchange. The resin beads chemically attract the unwanted ‘hard’ mineral ions and exchange them with sodium ions. Softener resin is mainly strong acid Cation resin.
When the resin beds become saturated with the minerals, the water softener flushes them out with a salt solution called brine and the process begins again. Water softeners are fairly easy to operate and maintain. All that needs to be done after installation is to periodically add sodium chloride and the water softener does the rest.
Sodium salts are not hard scales forming so that water without the calcium and magnesium salts is called soft water.
What is a water softener?
A water softener is a unit that is used to soften water, by removing the minerals that cause the water to be hard.
Why is water softening applied?
Water softening is an important process, because the hardness of water in households and companies is reduced during this process. When water is hard, it can clog pipes and soap will dissolve in it less easily. Water softening can prevent these negative effects. Hard water causes a higher risk of lime scale deposits in household water systems. Due to this lime scale build-up, pipes are blocked and the efficiency of hot boilers and tanks is reduced. This increases the cost of domestic water heating by about fifteen to twenty percent. Another negative effect of lime scale is that it has damaging effects on household machinery, such as laundry machines. Water softening means expanding the life span of household machine, such as laundry machines.
| Minimum Order Quantity | 1 Piece |
| Capacity | 5000 LPH |
| Inlet Flow Rate (m3/hr) | 1000 m3/hour |
| Automation Grade | Automatic |
| Capacity Inlet Flow Rate | 1M3/hr To 200m3/hr |
| Water Source | Industrial Effluent, River Water, Well Water, Borewell Water |
| Voltage(V) | 240V |
| Frequency Range | 50 Hz |
| Flow Rate | 10000 m3/hour |
| Body Material | Mild Steel Epoxy Painted, Mild Steel Rubber Lined, FRP, Stainless Steel |
| Brand | ARISEO WATER |
| Color | BLUE |
| Diameter Inch | 150'' |
| Length Inch | 150'' |
| Max Water Recovery Rate | 95% |
| Obr Output Between Regeneration | 2000M3 |
| Operating Pressure | 3.5KG/CM2 |
| Plant Application | Domestic, Commerciaql,Industrial,Institution, School, Collages, Private Sector Unit |
| I Deal In | New Only |
A water softener is a type of ion exchanger where the Ca and Mg ions are exchanged, usually for sodium ions. A softener is designed in function of the incoming water hardness and the capacity. The harder the water, the more volume of resins needed to soften a certain volume of water.
It is important that the water to be treated by the water softener does not contain suspended particles. These suspended particles could obstruct the water softener and prevent the resins from functioning correctly.
A standard water softener can be provided in simplex or duplex configuration. A simplex softener only consists of one softening column. When the installation is regenerating, no water can be softened. A duplex installation consists of 2 bottles. While one bottle is functioning, the other one is stand-by or regenerating.
For larger installations the principle of 'Merry go round’ is also used. It involves connecting three or more columns to one control unit with multiple columns in operation at all times. The advantage of this system is that the resins are used more optimally than in a duplex unit.
For the regeneration of the resins brine is used. This brine is usually produced by dissolving salt tablets in water or can be supplied as a ready to use product by the chemical supplier.
Often a water softener is used as a pretreatment for a RO, but in this case the dosage of anti-scalant offers an interesting alternative. Both in terms of investment costs, operational costs and usage.
| Minimum Order Quantity | 1 Unit |
| Usage/Application | Industrial |
| Automation Grade | Automatic |
| Water Source | Borewell Water |
| Capacity (LPH) | 100000 LPH |
| Softener Tank Type | Vertical |
| Material | Mild Steel |
| Frequency Range | 50-60Hz |
| Max Water Recovery Rate | 95 % |
| Voltage | 220V |
| Power Source | Electric |
| Inlet Hardness(TDS) | 501 - 1000 TDS |
| Pipe Fitting Size | 25 to 300 NB |
| Brand | ARISEO WATER TECH |
| Country of Origin | Made in India |
Industrial water softeners treat your water by removing hardness from the water using resin. Resin acts as industrial hard water treatment and replaces the hardness in the water with salt (brine) that is regenerated periodically. This resin is an integral part of industrial water treatment systems, as they're typically larger and harder to maintain than household systems.
Our industrial water softeners will effectively remove hardness, or calcium and magnesium, from the water that is being used in your industrial building or process. The resin acts as industrial hard water treatment and replaces the hardness in the water with salt (brine) that is regenerated periodically. Industrial water softeners can be installed in unique setups depending on your scale and usage, giving you the flexibility to tailor it to suit your needs and budget.
| Minimum Order Quantity | 1 Unit |
| Usage/Application | Industrial |
| Automation Grade | Automatic |
| Water Source | River Water |
| Capacity (LPH) | 100000 LPH |
| Softener Tank Type | Vertical |
| Material | FRP |
| Color | Blue |
| Frequency Range | 50-60Hz |
| Max Water Recovery Rate | 99 % |
| Voltage | 220V |
| Installation Required | Yes |
| Filter Media | Sand media |
| Inlet Hardness(TDS) | 0 - 500 TDS |
| Country of Origin | Made in India |
Industrial water softeners treat your water by removing hardness from the water using resin. Resin acts as industrial hard water treatment and replaces the hardness in the water with salt (brine) that is regenerated periodically. This resin is an integral part of industrial water treatment systems, as they're typically larger and harder to maintain than household systems.
Our industrial water softeners will effectively remove hardness, or calcium and magnesium, from the water that is being used in your industrial building or process. The resin acts as industrial hard water treatment and replaces the hardness in the water with salt (brine) that is regenerated periodically. Industrial water softeners can be installed in unique setups depending on your scale and usage, giving you the flexibility to tailor it to suit your needs and budget.
*Your information is safe with us.
| Minimum Order Quantity | 1 Unit |
| Capacity (LPH) | More Than 5000 LPH |
| Usage/Application | Industrial |
| Automation Grade | Automatic |
| Water Source | Borewell Water |
| Softener Tank Type | Vertical |
| Cleaning System | Ion-exchange Resin Method |
| Material | Mild Steel |
| Resin Volume | 150 - 200 Liters |
| Color | Grey |
| Max Water Recovery Rate | 80-90% |
| Voltage | 240V |
| Frequency Range | 50-60Hz |
| Inlet Hardness(TDS) | 501 - 1000 TDS |
| Filter Media | Ion exchange media |
| Regeneration Time(hours) | 4-5hours |
| Pipe Size In & Out | 4'' |
| Installation Required | Yes |
| Warranty | 1 Year |
| I Deal In | New and Second Hand |
| Deliver Type | PAN India, Outside India |
| Country of Origin | Made in India |